DeepSeek Harness Plugin

xianyuyijinban/boardwise#dsh-plugin

Stars ★ 13 Category Tools & Capabilities Added 2026-10-01

Offline schematic review for EasyEDA Pro, exposed to dsh as four tools — one-shot checkup reports, architecture skeletons, an install doctor, and a live-editor bridge that prefers read-only actions, all driven by the local boardwise CLI.

Install

# from a prebuilt release tarball

dsh plugin --profile web add "https://github.com/xianyuyijinban/boardwise/releases/download/v0.4.26/boardwise-dsh-0.1.1.tgz"

# from GitHub (first run asks for allowBuilds approval — follow the hint, retry)

dsh plugin --profile web add github:xianyuyijinban/boardwise#path:/dsh-plugin

Any plugin you install runs third-party code with your own permissions — it can read your files, use your credentials, and reach the network, and tool approvals don’t sandbox it. GitHub-sourced plugins also run build scripts at install time — pnpm blocks those until you allow them, so an install can stop with ERR_PNPM_GIT_DEP_PREPARE_NOT_ALLOWED or ERR_PNPM_IGNORED_BUILDS; dsh prints the exact key to add under allowBuilds in your profile’s pnpm-workspace.yaml, and the install works on the next run. Allowing a build is a trust decision: only install sources you trust, and pin a commit (github:owner/repo#sha).

README

This plugin publishes its README in Chinese only.

DeepSeek Harness(dsh)的 boardwise 插件:在 dsh 里直接调 boardwise 的审查工具面 —— checkup(一次审查出报告)、arch(架构骨架)、doctor(本机安装体检)、 bridge(连接器动作逃生舱),以及离线 draw compile / draw lint 回放,不用切窗口。

薄适配层,零逻辑复制:插件只 spawn 本机 boardwise CLI,把 stdout / exit code / 产物路径包装成 tool 返回值。解析器、规则引擎、报告——全在 Python 侧; TS 里不重算任何审查结论(任务书 045 §1)。

版本策略

从 0.6.0 起,插件版本与 boardwise 外部版本同号:根 shim package.json 与 dsh-plugin/package.json 一起改成 0.6.0,不再单独维护 0.1.x 线。 0.1.3 是 0.1.x 的最后一版;现有安装可继续使用,升级时按本版 tarball 重装。

DSH 内核兼容(2026-11-03 改):@deepseek-ai/dsh-session 与 @deepseek-ai/dsh-session-projection 的 peer 范围从精确 0.2.1-rc.1 放宽到 >=0.2.1-rc.1 <0.3.0-0。原因不是「想放宽」,而是 0.2.1-rc.3 起 DSH 在启动时校验 插件的精确版本要求,pin 在 rc.1 的插件会被整包跳过:

dsh: skipping profile bundle "boardwise-dsh": Error: Plugin boardwise-dsh@0.6.0 is
incompatible with dsh 0.2.1-rc.3: requirements {"@deepseek-ai/dsh-session":"0.2.1-rc.1", ...}

表现就是「profile 里装了、why 也查得到,但模型没有任何 boardwise_* 工具」。 放宽后 dsh --profile <p> --dump-config 会列出 # == boardwise-dsh / tool-boardwise。 API 面已对照 rc.3 核过:defineTool、ctx.tools.register(ToolDefinition)、 appendPluginRecord / pluginRecordOf、SessionProjectionRegistry 都在。

0.2.2-rc.1(DSH NEXT 2.0.22)适配:上游 projection 注册改为异步并返回 ready handle。 插件在完整 Promise 面出现时先等待并持有 handle,再注册 finalize 与 delivery gate;旧版只有 then 的可调用 disposer 仍走原同步路径,不会被误 await 成注销。两套真实依赖均跑过 typecheck 与 137 passed / 1 skipped。这是包级兼容验证,不等于 DSH NEXT 2.0.22 桌面 安装/profile 已实测;peer 范围无需因该版本再改,defineTool、tools/pre-execute、 appendPluginRecord / pluginRecordOf 与新包一致。

工具面

工具 包装的命令 关键参数 timeoutMs
boardwise_checkup checkup [--file F | --project P | --instance I] --out D file / project / instance 三选一,out 可选 600 000
boardwise_arch arch <file> [--out] file 必填 120 000
boardwise_doctor doctor [--project/--instance] 可选寻址 60 000
boardwise_bridge bridge call --read-only --action A --params J [--project/--instance] action/params 必填 120 000
boardwise_review_read review-read --out D --section S --json TMP out / section 必填,完整 JSON 返回 120 000
boardwise_review_evidence review-evidence --out D [--project P] [--page U ...] [--pcb U ...] out 必填,page/pcb 可重复 600 000
boardwise_triage_batch triage-batch --out D --input BATCH --json RESULT out / entries 必填,整批原子应用 120 000
boardwise_review_finalize review finalize --out D out 必填,签发当前 Session 的交付收据 120 000
boardwise_draw_compile draw compile --circuit C --presentation P --profiles S --out D --json J 三个输入必填,pageBox/intent/out 可选;整份 JSON 返回:单模块 candidates,页级 pages(见下) 600 000
boardwise_draw_lint draw lint --snapshot S --render R [--bodies B] --json J snapshot/render 必填,仅离线回放;完整 JSON 返回 120 000

统一约定:

  • 参数原样透传,插件不解释。唯一的前置校验:file 路径必须存在(不存在 → 执行前拒绝, 不 spawn);bridge 的 params 必须是合法 JSON 对象字面量;checkup 必须恰好指定 一个目标(file 或 project/instance),不替模型猜窗口。
  • 只读优先:所有工具都不修改设计。boardwise_bridge 强制 --read-only;分诊与 finalize 只更新审查报告和交付收据,真实工程的设计写仍走 CLI 的身份与权限闸。
  • 返回值 = exit code + cli(怎么找到的)+ command + 产物路径(report.json / report.md / architecture.md,逐个标 present / MISSING)+ stdout(必要时 stderr)。 非零 exit 是结果不是失败(doctor / checkup 就用 exit 报告状态); checkup 的 3 = 说不清(在线状态读不出来,或 completion.verdict 是 incomplete—— 审查没看全:空模型 / 器件缺手册未审 / 骨架没生成 / 覆盖有缺口),不是通过(073)。
  • 离线 draw 的结构化结果:boardwise_draw_compile 在 CLI exit 0(有候选)和 5(编译拒绝) 都读取并返回整份 --json 文件——前提是 CLI 真写出了这个文件;draw compile 在 "输入读不出" 时同样 exit 5 但不写文件,那种情况是错误(报错里显示实际 exit code)。 boardwise_draw_lint 在 exit 0 / 1 同样返回整份文件。 draw compile 有两种负载:单模块 presentation 返回 candidates + failureRounds, 页级 presentation(CLI 标 document: "page",即多模块 / 有 flow / 模块自带 grammarRef / page lock)返回 pages + moduleFailureRounds;两者都带 failures / categories / rejected / notes / previews。页级 presentation 需要 pageBox(CLI 自己会拒绝没有画布盒的页)。 exit 2、文件缺失或 JSON 损坏都是错误,不从 stdout 拼凑答案。lint 工具没有 live page 参数, 两个工具都不提供 apply,也不在 TS 重算候选、finding、severity 或 verdict——document 只用来 选校验哪一种传输形状,不用来判断图是否合法。
  • stdout 截断:超过 32KB 时留头 16KB + 尾 16KB,中间标出丢了多少字节;stdout/stderr 里 任何 token 形状的值一律打码(token=***)——daemon token 永不进日志或返回值。
  • 运行时零依赖(只用 node 内置模块);@deepseek-ai/cordis 与 @deepseek-ai/dsh-tools 是 peerDependencies,由 dsh profile 提供。

CLI 解析顺序

  1. 环境变量 BOARDWISE_EXE —— 指向 boardwise.exe,或指向一个装了 boardwise 的 Python 解释器 (名字像 python/py 时自动补 -m boardwise.cli)。指向不存在的文件 = 报错,不会悄悄换别的 (R3:找不到就停下来说,不自行替代)。
  2. PATH 上的 boardwise.exe(Windows 只自动执行 exe;.cmd / .bat 不直接 spawn, 因为 Node 无法在不经 shell 的情况下执行批处理,经 cmd.exe 又会把模型给的参数暴露在 shell 解析下。只有批处理启动器时请改用 BOARDWISE_EXE 指向 exe 或 Python)。
  3. PATH 上的 python / py + -m boardwise.cli(开发机 fallback;该解释器没装 boardwise 时, 结果里会附一行 hint 让你改用 BOARDWISE_EXE)。

三条都没有 → 报错文案直接给出三出路(装 exe / 设 env / 用仓库 venv)。

注意:插件不会自动探测仓库里的 .venv。报错文案第三条「用仓库 venv」是一条人照着做的 出路——把 BOARDWISE_EXE 指向 <repo>/.venv/Scripts/python.exe,不是插件的自动行为。 开发机上最常见的首次失败正是第 3 档:PATH 上的 Python 能跑、但没装 boardwise, 于是拿到 ModuleNotFoundError: No module named 'boardwise' 和一行 hint,而不是工具结论。

安装

先决条件:dsh 进程要能找到 boardwise CLI

插件只是 spawn 本机 CLI 的薄适配层,不把审查逻辑搬进 Node。所以装完插件还要保证 dsh 进程能按上一节的顺序解析到 CLI;否则第一次调用会返回一条指路错误(不是插件装坏了)。 本机实测能走通的路有两条(另附源码树冒烟时的默认指向):

A. 把仓库装进用户级 site-packages(开发机最省事)

pip install --user -e <boardwise 仓库>

这会生成 %APPDATA%\Python\Python3xx\Scripts\boardwise.exe;该目录通常已在 PATH 上, 插件的结果里会写 cli: path 并给出这个 exe 的绝对路径。dsh 桌面应用的子进程读同一份 用户级 site-packages,所以装完即可用,不必重启 dsh、不必设环境变量。

本机实测(2026-10-24):boardwise_doctor 返回 cli: path → C:\Users\<用户>\AppData\Roaming\Python\Python314\Scripts\boardwise.exe。 若 ...\Scripts 不在 PATH 上,改用 B 并把路径写死。

B. 装发布版 exe,并让 BOARDWISE_EXE 指向它

setx BOARDWISE_EXE "<boardwise.exe 的绝对路径>"
# 也可以指向装了 boardwise 的 Python 解释器(名字像 python/py 时自动补 -m boardwise.cli):
setx BOARDWISE_EXE "<boardwise 仓库>\.venv\Scripts\python.exe"

setx 只影响之后启动的进程:重开 dsh 才生效。指向不存在的文件时插件直接报错, 不会悄悄换用别的 boardwise(R3:找不到就停下来说)。

C. 源码树直接跑冒烟:npm run smoke 会自动把 BOARDWISE_EXE 指到 <repo>/.venv/Scripts/python.exe,不需要额外设变量(这条只是冒烟脚本的默认值,不是第三条安装路)。

构建与打包

cd <boardwise 仓库>/dsh-plugin
npm install
npm run typecheck && npm test && npm run build
npm pack                       # 产出 boardwise-dsh-<version>.tgz

构建后可用 npm run smoke:draw 对真实本机 CLI 做纯离线验收:公开 divider 夹具编译 + 合成空页 lint 回放;不连接编辑器、不调用 apply,产物保留并打印目录。

装进 profile

dsh plugin --profile desktop add file:E:/boardwise/dsh-plugin/boardwise-dsh-0.6.1.tgz
dsh plugin --profile web add file:E:/boardwise/dsh-plugin/boardwise-dsh-0.6.1.tgz
# desktop / web / headless 是**不同** profile,各装一次
dsh plugin --profile headless add file:E:/boardwise/dsh-plugin/boardwise-dsh-0.6.1.tgz

也可以从 GitHub 装(要求仓库根的 shim 已提交,见下节):

dsh plugin --profile desktop add github:xianyuyijinban/boardwise

或从 npm registry 装(发布后才可用,见下节 publish 指引):

dsh plugin --profile web add boardwise-dsh
dsh plugin --profile headless add boardwise-dsh

包内 dsh.bundle.patch 会把本插件插进 profile 的 layer stack(row id tool-boardwise)。 验证:

dsh plugin --profile desktop why boardwise-dsh   # 应报 1 个版本,挂在 dsh-profile-desktop 下
dsh --profile desktop --dump-config | grep tool-boardwise

让模型跑一次 boardwise_doctor:daemon 在线应看到 PASS 行与逐项结论; 多窗口在线时那 4 项会写「未验证」(daemon 设计上不猜窗口), 用 project= / instance= 指定一个窗口即转 PASS。

Electron 管理的 profile(本机 desktop):用脚本,不要走 dsh plugin

本机实测(2026-11-01):dsh plugin --profile desktop ... 会直接拒绝——

error: profile "desktop" is managed exclusively by the Electron application

DSH NEXT 把 desktop profile 的所有权锁给了应用本身,CLI 不转发。这不是 CLI 坏了: 同一份 @deepseek-ai/dsh 对 --profile boardwise-clean 正常(why boardwise-dsh 能报出版本),只是 desktop 那条路被应用接管。

对这类 profile 用仓库脚本,它做 CLI 本来会做的那四件事(备份 → 改依赖 → 补 bundles → pnpm install → 核对落盘版本):

node tools/dsh_plugin_install.mjs \
  --profile D:/dsh-home/profiles/desktop \
  --tarball dsh-plugin/boardwise-dsh-0.6.1.tgz

node tools/dsh_plugin_install.mjs --profile <dir> --tarball <tgz> --dry-run   # 只看计划

备份落在 profile 旁(profiles/ 不可写时退到 DSH home 根或 profile 内)的 _backup_boardwise-dsh_<stamp>,含 package.json、pnpm-lock.yaml 和已装包。 装完重启 DSH 才生效;回滚 = 拷回备份里的两个清单再跑一次 pnpm install。

headless profile 的 store 分裂(已裁:新建 profile)

现象:headless profile 上的 dsh plugin --profile headless add <tgz> 会报 ERR_PNPM_UNEXPECTED_STORE——pnpm 认为这个 node_modules 是另一个 store 物化的, 于是拒绝在它上面继续装。

本机证据(2026-10-24 读文件所得,不是猜):

D:\dsh-home\profiles\headless\node_modules\.modules.yaml
  storeDir:        C:\Users\<用户>\AppData\Local\pnpm\store\v11
  virtualStoreDir: C:\Users\<用户>\.dsh\profiles\headless\node_modules\.pnpm
D:\dsh-home\profiles\desktop\node_modules\.modules.yaml
  storeDir:        D:\.pnpm-store\v11
  virtualStoreDir: D:\dsh-home\profiles\desktop\node_modules\.pnpm

headless 的 node_modules 是早先 ~/.dsh 时代物化的,profile 后来搬到了 D:\dsh-home\profiles\headless,但 .modules.yaml 里记的还是旧的 store 与旧路径; desktop 则用 D:\.pnpm-store\v11。两套 store 对不上,pnpm 就报这个错。

最小复现(2026-10-24 实测触发;在已存在的 headless profile 上再装一次即可,不需要先卸载, pnpm 在解析阶段就拒):

dsh plugin --profile headless add file:E:/boardwise/dsh-plugin/boardwise-dsh-0.6.1.tgz
# → ERR_PNPM_UNEXPECTED_STORE(modules dir 的 store 与当前 store 不一致)

处置(2026-10-24 已裁):不要为了消掉这个报错去清空或重链 DSH_HOME 的 pnpm store——那会牵动 desktop / web 两个在用的 profile。也不迁移旧 headless 的 node_modules;从 headless 模板新建一个干净 profile,在它上面安装:

dsh --profile boardwise-clean --from-default-profile headless --dump-config
dsh plugin --profile boardwise-clean add file:E:/boardwise/dsh-plugin/boardwise-dsh-0.6.1.tgz

本机实测:安装 431ms 成功,--dump-config 出现 # == boardwise-dsh / tool-boardwise;旧 headless 的 store 与 node_modules 一个字节未动。现有 headless 里已经装好的 0.1.3 仍可照用, 需要干净安装就用新 profile。

web profile:旧 profile 不硬修,新建 boardwise-web-clean

现有 web profile 的 node_modules/.modules.yaml 还记着 C:\Users\xiangyu\.dsh\profiles\web\node_modules\.pnpm(profile 搬过家),在原 profile 上安装会报 ERR_PNPM_UNEXPECTED_VIRTUAL_STORE。不重建旧 web 的依赖,按 headless 同法 从 web 模板新建一个干净 profile:

# 当前 Desktop CLI;版本目录以本机 host-commands 为准
DSH="$HOME/AppData/Roaming/DSH Desktop/host-commands/desktop/generations/<hash>/bin/dsh.cmd"
"$DSH" --profile boardwise-web-clean --from-default-profile web --dump-config
"$DSH" plugin --profile boardwise-web-clean add \
  file:E:/boardwise/dsh-plugin/boardwise-dsh-0.6.1.tgz
"$DSH" --profile boardwise-web-clean --dump-config | grep -n 'tool-boardwise'

本机实测:安装 377ms,--dump-config 出现 # == boardwise-dsh / tool-boardwise。 启动 web 时用 --profile boardwise-web-clean;旧 web profile 保持原样。

DSH STORE 那条命令现在能用了(根 shim)

DSH STORE 的安装命令指向的是仓库根:

dsh plugin add github:xianyuyijinban/boardwise

根目录过去没有 package.json,pnpm 只能伪造一份占位清单,把整仓当普通依赖装进去: 不报错、也不挂任何 bundle——于是 0 工具注册,插件看着像「装了但用不了」。 这是那条命令的历史死因,不是配置问题。

仓库根现在补了一份纯 shim package.json("name": "boardwise-dsh"、版本与插件同步、 main / types 指进 dsh-plugin/lib/、dsh.bundle.patch 指向 dsh-plugin/cordis.patch.yml),装上它就能真正挂上 bundle、注册 10 工具。 shim 不是 npm 工程:没有 scripts、没有 dependencies,根目录不跑构建。

shim 必须提交进 HEAD 才会生效:pnpm 的 git 依赖物化的是提交树, 工作区里未跟踪的改动一律不进安装结果(实测:根目录新建的未跟踪标记文件在装出来的 node_modules/<pkg>/ 里不出现)。所以 shim 落盘但没 commit 时,商城那条命令 仍然是老样子(placeholder + declares no dsh.bundle)。

  • 首选仍是 tarball(离线、可重现、不依赖 registry),其次 npm(发布后), 商城根命令只作为最后兜底——它把整仓当依赖拉下来,体积与版本都跟着 git 走。

验证(本机到 github.com:443 不通,离线替身用 git+file:///E:/boardwise):

# ① 工作区里的 shim 形状对不对(不依赖 commit,装的是工作区本身):
dsh plugin --profile <临时 profile> add file:E:/boardwise
dsh plugin --profile <临时 profile> list            # 依赖里应见 boardwise-dsh(不是 boardwise)
dsh --profile <临时 profile> --dump-config | grep tool-boardwise
# ② shim 提交之后,商城那条路(git)才等价:
dsh plugin --profile <临时 profile> add git+file:///E:/boardwise

②在 shim 未提交时会打 dsh: warning: … declares no dsh.bundle——那是 HEAD 里还没有 shim 的正确警告,不是命令写错了。

发布到 npm registry

发布要仓库 owner 的 npm 账号,本仓库不代发:

npm login                       # 用 owner 账号
cd dsh-plugin
npm publish --access public     # 源码:只要 dsh-plugin/,不是仓库根

发布前自查:

cd dsh-plugin && npm run check  # typecheck + test + build
npm pack                        # 产出 boardwise-dsh-<version>.tgz
tar -tzf boardwise-dsh-<version>.tgz   # 应含 lib/index.js、lib/types/、cordis.patch.yml
npm publish --dry-run           # 只看文件面,不上传

package.json 的 files 白名单决定发布内容(lib / src / cordis.patch.yml / README.md); lib/ 已入库(DSH STORE 的固定提交自动化只读 git 树,不跑 prepare/build)。

已验证的 dsh 版本

dsh 结果 证据
0.1.7-rc.2 ✔ 全通 2026-09-29 实测:plugin add exit 0、bundle patch 生效、4 工具注册 4/4、boardwise_arch 真调 exit 0
0.2.0-rc.1 ✔ 全通 同一轮实测,输出与 0.1.7-rc.2 逐字节相同
0.2.1-rc.2 ✔ 桌面版实读 2026-10-24 桌面 profile 实测:plugin why 报 1 个版本、--dump-config 有 tool-boardwise、boardwise_doctor 真调 exit 1(daemon 在线、结果非失败)、boardwise_checkup 真调 exit 3 且 report.json / report.md / architecture.md / design-intent.md 四件产物均 [present]
0.2.2-rc.1 ✔ 包级与隔离 CLI profile 通过 2026-11-06 同版依赖 typecheck/build + 137 passed / 1 skipped;隔离 bw022 的 plugin why 报 1 个版本、--dump-config 含 tool-boardwise;DSH NEXT 2.0.22 桌面应用尚未实测

原始日志与结论:outputs/066_dsh_matrix/VERDICT.md(零 FAIL 格;0.2.1-rc.2 一行是 2026-10-24 在桌面 profile 上的补读,不是矩阵里那一轮的产物)。

  • peer 范围:@deepseek-ai/dsh-tools peerDep 自 0.1.1 起是三分支范围 >=0.0.1-rc.1 <0.3.0 || >=0.1.7-rc.2 <0.2.0-0 || >=0.2.0-rc.1 <0.3.0-0 (0.1.0 是 <0.2.0)。为什么必须分三段:node-semver 只放行「范围里存在同 major.minor.patch、且自身带预发布标签的比较符」的预发布版本,所以单段 <0.3.0 看着宽、 实际把 0.1.7-rc.2 / 0.2.0-rc.1 静默排除(npm 路径报 ERESOLVE);把这两版的 tuple 显式列进 || 分支,npm 消费者才装得上。
  • 覆盖表(npm 自带 semver 实测):0.0.1-rc.1 ✔、0.1.7-rc.2 ✔、0.2.0-rc.1 ✔、 0.1.7 ✔、0.2.0 ✔、0.3.0 ✘。更老的 rc(0.1.0-rc.6、0.1.5-rc.x 之类)不在 npm 路径覆盖内——每一版都要自己的同 tuple 分支,而它们从未实跑过;dsh 自己的 profile 安装走 pnpm(autoInstallPeers: false,不强制 peer),不受这条边界影响。
  • 未验证区间:低于 0.1.0-rc.6 的 dsh 从未实跑过(peerDep 下界 0.0.1-rc.1 只是语义边界, 不等于实测边界)。cordis peerDep ^4.0.1 未动(实测 4.0.4 类型与插件内完全一致)。

开发

npm run typecheck     # tsc --noEmit(src 为唯一被检查的源码)
npm test              # vitest run tests —— 138 例(137 过 1 跳过;mock spawn,不起真进程)
npm run build         # → lib/
npm run smoke         # 独立冒烟:import lib/index.js,真起 CLI(见下)

npm run smoke 是任务书 §2 的独立冒烟脚本,真机只读:

  1. boardwise_doctor:真连 daemon(127.0.0.1:61190),断言真报告(有 PASS 行、提到 daemon);
  2. boardwise_arch file=tests/fixtures/ch340_golden.epro2:离线骨架 + TODO 槽位 + 轨计数;
  3. boardwise_checkup --file 同一夹具,--out 进临时目录:断言 report.json / architecture.md 真存在且有内容,且结果里标 [present],另解析 report.json 校验结构;
  4. 三条错误路径:文件不存在(spawn 前拒绝)、BOARDWISE_EXE 指向不存在的文件、 PATH 上什么都没有——各自断言明确报错文案。

它不碰在线编辑器写动作,也不调 bridge 任何动作。

在受限文件沙箱里跑时,第 3 步可能报 exit 1 而不是 0/3:node 在 %TEMP% 建的目录, 沙箱外的子进程 Python 写不进去(PermissionError: …\report.json)。这是环境 ACL 限制, 不是插件缺陷——真实桌面 dsh 里同一调用返回 exit 3,四件产物均写出。

非目标

不做 dsh 客户端(浏览器半边)插件、不做主题/UI、不发 npm registry、 不在 TS 侧实现任何审查逻辑、不提供写操作工具(edit apply 走 CLI)。 dsh SKILL 加载机制与本仓库 SKILL.md 的衔接是后续任务,本插件只负责工具面。

权限与边界(DSH STORE 固定源码审查对应)

  • 进程:spawn 本机 boardwise CLI(子进程);file 参数不存在时执行前拒绝,不 spawn。
  • 文件:只写用户显式给的 --out 目录;读取工程文件/报告。不碰其它路径。 没给 --out 时(boardwise_checkup)自己建一个系统临时目录 (os.tmpdir() 下 boardwise-dsh-*,每次一份)——那是系统临时目录,不是当前目录, 也不会在结束时清理(报告要留给模型读)。
  • 网络:仅经本机 loopback 访问 boardwise daemon(127.0.0.1:61190,经 CLI);不访问任何外部服务。
  • 失败边界:CLI 非零 exit 原样作为结果返回(不伪装成功);stdout 超 32KB 截断并标注;token 形状的值一律打码。
  • 依赖:运行时零依赖(node 内置模块);@deepseek-ai/cordis、@deepseek-ai/dsh-tools 为 peerDependencies,由 dsh profile 提供。

Content from the project README on GitHub ↗

Links

More in this category

View the whole category →

Community comments

Comments are public GitHub Discussions. Loading them connects to GitHub and Giscus; a GitHub account is required to post.