1207291706/dsh-restart-foot

A restart button for the DeepSeek Harness desktop app, placed at the sidebar foot — directly above the avatar / Settings entry.

English — One row in the sidebar's foot area that stops the whole application (main process, renderers, and the DSH host itself) and starts it again, so freshly installed plugins and settings take effect without quitting by hand. Desktop shell only.

中文 — 在 DSH 桌面端侧栏底部、头像/设置入口的正上方加一枚「重启 DeepSeek Harness」按钮：点击两次确认后，结束整个应用（主进程、渲染进程、宿主自身）并重新拉起。装完插件、改完配置不用手动退出了。

Where the button sits / 位置

The row registers in the sidebar.footer.action slot. The sidebar's foot area is a vertical stack (.footArea → .footerActions → .settingsArea), so this list renders directly above the settings / account seat:

┌ sidebar foot ────────────────┐
│  ⟳  Restart DeepSeek Harness  │  ← this plugin (sidebar.footer.action)
│  [avatar]  account / settings │  ← ui-settings / ui-settings-account
└───────────────────────────────┘

Note: the pop-up menu behind the avatar (Settings / Feedback / Sign out) is rendered by the shipped package @deepseek-ai/dsh-client-ui-settings-account (AccountMenu) with hard-coded rows and no insert slot. This plugin therefore places the button in the foot row above that menu rather than inside it — the only additive option that does not shadow shipped UI.

Behaviour / 行为

• First click arms the button (it turns into the error colour and reads “Click again to confirm”; it falls back to idle after 5 s).
• Second click sends POST /dsh-restart-foot/restart. The host writes a cmd batch and starts it through wscript.exe.
• No console window: wscript.exe is a GUI-subsystem program, so Windows never gives it a console; it runs the batch with a hidden window style. The helper is started detached anyway, because the desktop application owns its children through a job object — an ordinary child is killed together with the application and would never finish the restart. Detaching is what makes it survive; wscript is what makes it invisible.
• The batch waits 1 s so the HTTP reply reaches the page, stops every process of the application image, polls until the image is really gone (up to 20 s), force-stops leftovers by pid, and only then starts the executable again. Waiting matters: starting a second copy while the first is still shutting down is what makes the shell report a broken installation or an already-running instance.
• ELECTRON_RUN_AS_NODE is cleared before the relaunch. The host runs with that flag — the desktop shell starts the DSH host from the application binary in Node mode — so a helper that inherits it and starts the binary would get a plain Node process with no script, which exits at once. That failure looks exactly like “it closed and never came back”, and it is the reason this line exists.
• After starting, the batch verifies that the application appears (up to 20 s) and logs application is back or a warning, so the log alone tells you which step failed.
• Two helpers are written — the wscript launcher and the bare batch as a fallback — and each is tried detached first, then hidden. Launch failures are never swallowed: the page shows the reason (hover the button) and /ping keeps it in lastLaunchError.
• Log: %TEMP%\dsh-restart-foot.log (one line per step: request, stop, wait rounds, force-stop, start, back / did-not-appear).
• Running agent turns are interrupted, like with any restart. Session logs are on disk, so a reopened session continues.
• The control is a compact icon button built from the shell's own Button, Tooltip and refresh icon, so its colours, hover fill and focus ring follow the design system. Motion is limited to interaction: the icon turns a half turn on hover, presses down slightly, nudges twice while armed, and spins while restarting — with no idle animation, because a permanently turning arrow pulls attention away from the conversation. prefers-reduced-motion turns all of it off.

Requirements / 环境要求

• DeepSeek Harness desktop app on Windows. The client half registers only when the page origin is dsh-app:; in a plain browser (http://127.0.0.1:<port>) there is no application to relaunch, so the row is not registered at all.
• The host half refuses with 501 unless process.execPath really is an application executable (node.exe from a terminal dsh web is rejected).
• Node 20+. No build step, no runtime npm dependencies.

Install / 安装

From GitHub (current route / 当前安装方式):

dsh plugin add github:1207291706/dsh-restart-foot
# same source, explicit git form / 同一来源的 git 写法
dsh plugin add git+https://github.com/1207291706/dsh-restart-foot.git
# into a named profile / 指定 profile
dsh plugin add --profile desktop github:1207291706/dsh-restart-foot

From npm — not available yet / 暂未上架 npm: the package is finished and packed (npm publish --dry-run passes), but www.npmjs.com returns 403 on the author's network, so the account cannot be registered from there. The npm form below starts working the day it is published: 包已经打好、npm publish --dry-run 通过，但作者所在网络访问 www.npmjs.com 返回 403，无法注册账号；下面这条命令在正式上架后即可使用。

dsh plugin add dsh-restart-foot

Then refresh the page (or restart once the old way) to pick up the client module.

Uninstall

dsh plugin remove dsh-restart-foot

Routes / 路由

Method	Path	Purpose
GET	/dsh-restart-foot/ping	Liveness probe: platform, whether a desktop target was found, the executable path, the resolved PowerShell path, and lastLaunchError.
POST	/dsh-restart-foot/restart	Schedules the restart. Requires the x-dsh-restart-foot: 1 header, which keeps stray GETs, prefetchers and other tabs from stopping the app; a cross-origin caller cannot set it without a CORS preflight this server never grants.
POST	/dsh-restart-foot/restart?probe=1	Reports the target without touching any process.
POST	/dsh-restart-foot/selfcheck	Diagnostic: starts cmd / PowerShell probes that only write marker files and run a taskkill against a nonexistent image, then reports exit codes and captured stderr. Touches no real process. Same header required.

If a click seems to do nothing, this is the order to look in: the button's tooltip (the failure text), /dsh-restart-foot/ping (lastLaunchError), /dsh-restart-foot/selfcheck (which launch kinds this host can actually start), then %TEMP%\dsh-restart-foot.log (what the helper itself did).

The routes are served by the DSH web server and are reachable from any client that can reach the port; bind the server to loopback (the default) if you do not want that.

Layout / 文件

File	Role
index.js	Host half: the routes, the helper writers and the launch attempts.
client.js	Browser half: the row registered into sidebar.footer.action.
cordis.patch.yml	Bundle patch: inserts the restart-foot row.
locale/zh.json, locale/en.json	meta.title / meta.description for the plugin list, plus the row's dictionaries.
icon.svg	Plugin icon (original artwork, MIT).

Credits / 致谢

The restart-helper approach — detached helper, stop by image name, confirm exit before starting again — follows the MIT-licensed dsh-restart-button by CZY1326. This package is an independent implementation for its own slot placement, route prefix, helper script and log file.

License

MIT — see LICENSE.