TongaiLinC/dsh-mobile-access

📱 dsh-mobile-access

Mobile access plugin for DeepSeek Harness

Let phones and tablets reach the DeepSeek Harness Web GUI over LAN or VPN, with a built-in PC-side approval gate, automatic LAN / VPN / WAN detection, and network-mode switching.

🌐 Language / 语言：English · 中文

---

For security, the DeepSeek Harness web server binds 127.0.0.1 only, and --host 0.0.0.0 is intentionally disallowed. This plugin works through the plugin runtime (webServer + subprocess): the PC starts a gateway proxy (0.0.0.0:<port>) with one click, phones scan a QR code to connect, and first access must be approved on the PC — keeping unauthorized devices out.

📑 Table of contents

• ✦ Features
• ✦ Installation
• ✦ Quick start
• ✦ How it works
• ✦ FAQ
• ✦ Third-party adaptation
• ✦ Documentation
• ✦ License

---

Features

• ✅ PC-side approval gate: a phone's first access requires PC approval; approve / reject / revoke / restore / delete / revoke & forget (revoke plus record removal in one step)
• ✅ LAN / VPN / WAN auto-detection: access sources are classified automatically (LAN / VPN / direct WAN), and the phone asks whether to switch when the network environment changes
• ✅ Secure WAN access: direct WAN connections are advised to switch to Tailscale / ZeroTier; a "block direct WAN" policy can force VPN-only access
• ✅ QR-code access: the PC panel embeds a QR code (pure-JS generator, zero external dependencies) — scan to connect
• ✅ Live workspace sync: the PC's "current session" is synced to the phone, so both sides open the same workspace
• ✅ WebSocket realtime forwarding: the gateway proxy fully forwards the /api/events.mux and /api/events.host WebSocket channels — messages arrive live, no manual refresh
• ✅ Theme adaptive: all colors use DSH theme tokens (--dsw-alias-*), adapting to light / dark themes and third-party skins (e.g. dsh-deep-whale)
• ✅ Mobile UI adaptation: input-bar tool/action rows auto-wrap, settings modal goes fullscreen, skin character layers avoid overlaps, font sizes tuned for phone screens
• ✅ State persistence: devices, policy, and mode selections are stored in $DSH_HOME/dsh-mobile/state.json and survive restarts

---

Installation

This is a static cordis plugin package that loads automatically when DSH starts — the same installation model as official plugins (e.g. dsh-balance-plugin).

Option 1: the dsh plugin command

# local directory install (development)
dsh plugin --profile web add dsh-mobile-access

# or install from GitHub (pinned to release v1.0.4)
dsh plugin --profile web add dsh-mobile-access@github:TongaiLinC/dsh-mobile-access#v1.0.4

Option 2: edit the profile manually (same as existing plugins)

Edit $DSH_HOME/profiles/web/package.json:

{
  "dsh": { "profile": { "bundles": [ /* ... existing bundles ... */ "dsh-mobile-access" ] } },
  "dependencies": {
    // local development: link to the repo dir; production: use the GitHub address
    "dsh-mobile-access": "github:TongaiLinC/dsh-mobile-access"
  }
}

Then run pnpm install (or npm install) inside the profile directory and restart DSH. The plugin is active when the blue 「📱」 floating button appears at the bottom-right of the PC page.

✅ After a production install there is no need to redeploy on every restart (unlike the dynamic build); device and policy data stay in $DSH_HOME/dsh-mobile/state.json and are shared with the dynamic build.

Option 3: dynamic build (development / temporary use)

Run the content of dsh-mobile-access.js as code.host in a Web GUI session via cordis_define + cordis_run. The dynamic build is process-scoped and must be redeployed after each DSH restart; it suits fast iteration, while production use should prefer options 1/2.

Requirements

• DeepSeek Harness (Web GUI build) with the Cordis plugin system
• A PC running DSH with normal network access (Windows / macOS / Linux — address enumeration auto-adapts)
• Phone and PC on the same LAN (for LAN access), or Tailscale / ZeroTier installed on both (for VPN access)
• Windows users: allow the gateway port (default 3081, TCP inbound) through the firewall

Development environment

This plugin is developed with DeepSeek Harness in Create mode:

• Primary model: deepseek-v4-flash (Max mode)
• Secondary model: deepseek-v4-pro (Max mode)

Mobile adaptations are verified with Playwright in real browsers (iPhone / Android viewports).

---

Quick start

1. PC: start the gateway

Click the bottom-right 「📱」 button to open the "Mobile Access" panel:

1. Click 「Start gateway」 (listens on 0.0.0.0:3081; the port is configurable);
2. The panel renders a QR code (the LAN address);
3. On first use, Windows may show a firewall prompt — allow node.exe for private-network inbound.

2. Phone: scan to connect

• Connect the phone to the same Wi-Fi and scan the QR code with the camera / WeChat to open the GUI;
• or type http://<PC-LAN-IP>:3081 in the browser (copyable from the panel).

3. First-access approval

• The phone's first visit lands on a gate page (waiting for approval) or a fullscreen gate overlay;
• Name the device and submit the request;
• The pending device appears under "Device approval" in the PC panel → click 「Approve」;
• The phone is admitted automatically within about 3 seconds.

4. Network-mode switching

• The phone shows a mode badge at the top of the screen: LAN / VPN / direct WAN; tap it for a hint;
• When the access method changes (e.g. Wi-Fi → cellular), a popup asks whether to switch;
• On direct WAN it recommends connecting Tailscale / ZeroTier and switching to the VPN address (copyable from the "VPN addresses" section of the panel).

5. Device management (PC panel)

Status	Available actions
Pending	Approve / Reject
Approved	Revoke (keep record) / Revoke & forget (revoke + delete record, with confirmation)
Rejected / Revoked	Restore / Delete record

6. Security policy (PC panel)

• Block direct WAN: when enabled, devices from WAN sources are blocked and must connect via VPN;
• Gateway port: change it and click "Save policy".

Repository layout

dsh-mobile-access/                  # this repo IS an installable DSH plugin package (npm layout)
├── package.json                    # package manifest: dsh.bundle.patch points at cordis.patch.yml
├── cordis.patch.yml                # composition patch: inserts the plugin row into the profile
├── lib/index.js                    # Host plugin body (static cordis plugin, ESM)
├── dsh-mobile-access.js            # dynamic source (code.host function body for in-session cordis_define)
├── README.md / README.en.md        # bilingual readmes
└── CHANGELOG.md                    # version changelog

---

How it works

phone ──> http://<LAN-IP>:3081 (gateway proxy, 0.0.0.0)
              │  gate decision (x-dshm-real-ip / x-dshm-forwarded-host trusted from loopback only)
              │  unapproved device → 302 gate page; approved device → forwarded
              ▼
         127.0.0.1:3080 main server (Host rewritten to 127.0.0.1 to pass the /api trust fence)
              │  injects boot.js (PC panel / phone gate / mode popup / badge / QR)
              ▼
         state persisted to $DSH_HOME/dsh-mobile/state.json

Key mechanisms:

• webServer.tapIndex injects /dsh-mobile/api/boot.js into every GUI page (PC panel, phone gate, mode popup, QR code) and prepends a crypto.randomUUID polyfill into <head> (phones reach the GUI over http://<IP>, a non-secure context where several product UIs depend on that API and would crash without it);
• webServer.register serves the /dsh-mobile/api/* endpoints and the /dsh-mobile/gate.html gate page;
• subprocess spawns the node gateway proxy process, forwarding HTTP and WebSocket (including the 101 upgrade handshake);
• Device approval, policy, and mode selections are persisted via fs.

---

FAQ

Q: The phone can't open http://<IP>:3081? Check: phone and PC on the same LAN; the gateway is running (visible in the panel); Windows firewall allows the port (Windows Security → Firewall → allow node.exe private-network inbound).

Q: The plugin is gone after a DSH restart? The dynamic build is process-scoped and must be redeployed as described under Installation; device and policy data remain in $DSH_HOME/dsh-mobile/state.json.

Q: Some phone pages are blank / throw errors? Force-refresh the page (to pull the latest boot.js). Most remaining issues come from the non-secure context missing crypto.randomUUID — the plugin ships a polyfill; if it still occurs, report the "boot version" shown at the bottom of the PC panel to the author.

Q: Can WAN connect directly? Yes, but using a VPN (Tailscale / ZeroTier) is strongly recommended; enable "Block direct WAN" in the PC panel to force VPN-only access.

Q: The phone can't connect after changing the gateway port? After saving the policy, restart the gateway (stop then start) and make sure the firewall allows the new port.

---

Third-party adaptation

dsh-balance-plugin (DeepSeek balance monitoring and usage statistics: balance monitoring · official top-up entry · Miyu-style usage stats · third-party plugin management) renders its overlay inline in the input bar, which causes mobile issues such as truncated overlays, overlays covered by the sidebar/topbar, and overflowing detail tables — this plugin ships a complete adaptation suite (overlay stacking/position fixes, render-level verification, iOS overlay migration, horizontal table scrolling). No extra configuration needed after installation. See section 8.4 of the docs.

---

Documentation

Full development and usage documentation lives on the docs site: "DSH Guide → Chapter 17 Mobile Access Plugin" — https://docs.tongai.vip/docs/dsh/zhinandaodu.html (17 chapters: installation, PC panel, phone flows, network-detection algorithms, gateway proxy, API reference, persistence, mobile UI adaptations, and more).

---

License

MIT